Sun Blade X6250 Server Module
 
Sun Blade 6000 System
 

GCS>Sun Microsystems>Sun FAB>Hardware Remediation>Mandatory
 

• Part No: 300-1802-07
• Part Description: 300-1802-07 Power Supply (PSU)

Some or all Blades on a Constellation 10 shelf (Sun Blade 6000) may shut down spontaneously. The affected Power Supplies (PSUs) have been reported to cause component damage to the Electronic Circuit Breaker (ECB) circuit on some Wolf (X6250) Blades.

Wolf Blade (Sun Blade X6250), A93-AA, X4360A, X4361A, X4362A, X4363A, X4364A, X4365A may be damaged by affected PSUs.

Sun Blade 6000 servers with Power Supply (p/n 300-1802-07) having a date code of between 0723 and 0728 inclusive are impacted.

Some or all Blades on a Constellation 10 shelf (Sun Blade 6000) may shut down spontaneously.

The Model A206 PSU, Sun p/n 300-1802-07, was ECO released to incorporate rework of -06 PSUs beginning date code 0723. With the new layout on the -07 parts (which was to incorporate the rework into the fab), it was found that the PSU could now not deliver rated output current. This was root caused to a current spike blanking circuit.

With the blanking circuit installed in the current layout voltage spikes as high as 15V on the 12V output have been seen. Constellation Blades use electronic circuit breaker (ECB) components to protect the Blade from overvoltage. On most Blades, the ECB components are rated at 20V. The Wolf Blade ECB is only rated at 15V, so the ECB components on that card can actually be damaged by this design issue.

The responsible blanking circuit was removed as of date code 0729. Services Logistics inventory (RSLs) were never shipped any affected PSUs and are therefore not impacted.

Implementation Target Completion Dates:

AMER: January 11, 2009
APAC: January 11, 2009
EMEA: January 17, 2009

Replacement Time Estimate: 30 minutes

Hot Swappable: Yes

Proactively replace 300-1802-07 (having date codes of 0723 - 0728) with 300-1802-07 (or later) with date code other than 0723 - 0728.

Customers with Wolf Blades (Sun Fire X6250) should be contacted first.

Identification of Affected Parts (how to):

Visually inspect A206 PSU (p/n 300-1802-07) for date code of between 0723 and 0728 inclusive. This can be done by looking at the PSU Serial Number.

Example: If Serial Number = "1841DET-0726A42172" then "0726" is the date code.

To aid the field in locating affected customers, a Customer List is available via the below (internal only) URL;

http://sunfit/

In addition, a Sun Legal approved Customer Letter is available via the below URL;

http://sdpsweb.central/FIN_FCO/FCO/A0292-1/SPE/Customer_Letter.sxw

For US/Canada, parts are VERY limited until January 31, 2008.  ONLY SB6000s sold with Wolf Blades (X6250s) should be remediated between January 11 and January 31, 2008.  See SunFIT for affected serial numbers and note that all SB6000s sold with Wolf Blades will have w/X6250 in their S/N.

Example: 0744BD0695

                w/X6250

 

All other affected SB6000s should begin parts replacements after January 31, 2008.

This FCO will have a time zone phased release based on material readiness as follows:

   Timezone      Readiness Date

    --------      --------------

    US/Canada     READY * (See COMMENTS section)

    Ltn America   READY

    EMEA          Jan/17/2008

    APac          READY

    ANZO          READY

    Japan         READY

 

The above dates represent when each time zone has determined that it will be materially ready to support this FCO. All dates are estimates. Check with your Logistics Representative or TZ / Country / Area FCO Manager for more information with regard to material availability and the parts ordering process for this FCO.

• GSAP: 4137
• URL: http://sdpsweb.central/FIN_FCO/FCO/A0292-1/SPE/Customer_Letter.sxw

For information about FAB documents, its release processes,
implementation strategies and billing information, go to the following
URL:

• http://tns.central/fab

For Sun Authorized Service Providers go to:

• http://tns.central/SPE/fab/

In addition to the above you may email:

• [email protected]

This solution has no attachment