Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Sun Fire[tm] V890 2100 Server, RoHS:YL: Repair Procedures

This section provides the most common repair procedures for the Sun Fire V890. The following links are located in the Sun Fire V890 Server Service Manual (817-3957).

Clustered Hardware Note: When repairing a clustered system, you should replace server components by first switching over the data services to the functioning server, halting the host to be serviced, powering down the host, and then performing the hardware procedure to replace the component. Following the procedure, the logical hosts should be switched back to the default masters.

The following table provides the page numbers for each procedure.

Component Tips
Power Supply
  • FCO A0308-1: After system power down one of the PSUs in Sun Fire V890 may not turn back on at power up. (FAB 1021640.1).

  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback