Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Sun Fire[tm] V440 Server, RoHS:YL: Hardware Specifications

Processor
Number One to four
Architecture UltraSPARC® IIIi 1.593 GHz
Cache memory 64 KB data, 32 KB instruction and 1 MB integrated L2
Main Memory
Capacities 4 DIMM slots per processor
Registered DDR-1 SDRAM
System configurations from 2 GB to 32 GB
Standard Interfaces
Ethernet Two 10/100/1000 BaseT Ethernet
One 10 BaseT Ethernet (network management)
PCI Six internal PCI 2.2 compliant expansion slots:
  • Three 64 bit 33/66 MHz 3.3V full-length (slots 2, 4, 5)
  • Three 64 bit 33 MHz 5V full-length (slots 0, 1, 3)
  • SCSI One Ultra320 SCSI (LVD)
    System Configuration Card Front accessible for transfer of system configuration information, including host ID
    Serial One TIA/EIA-232-F asynchronous (DB9) Port
    One TIA/EIA-232-F (RJ45) Port (management)
    USB Four OHCI-1.1 Compliant Interfaces, supporting dual speeds of 12 and 1.5 Mbits/sec each
    Internal Mass Storage
    Disks Up to four hot plug Ultra320 SCSI 73GB or 146GB Disks
    DVD-ROM One Slim-line ATAPI DVD-ROM
    Environment
    AC input 90 - 264 V AC (47- 63 Hz)
    Input power 650 W (Max)
    570 W (Typical)
    Heat output 2218 Btu/hr for operation @ 100 VAC to 240 VAC
    Temperature Operating: 5°C to 40°C (41°F to 104°)
    Nonoperating: -40°C to 60°C (-40°F to 140°)
    Humidity Operating: 20% to 80% relative humidity, noncondensing, 27°C max wet bulb
    Nonoperating: Up to 93% relative humidity, noncondensing, 38°C max wet bulb
    Altitude Operating: Up to 3000m, maximum ambient temperature is derated by 1°C per 500m above 500m
    Nonoperating: Up to 12000m
    Acoustic noise Operating: 6.7 Bels
    Idling: 6.7 Bels
    Vibration Operating: 0.0001 g2/Hz, 5 to 150 Hz, -12db/octave slope 150 to 500 Hz
    Nonoperating: 0.001 g2/Hz, 5 to 150 Hz, -12db/octave slope 150 to 500 Hz
    Shock Operating: 3.0 g peak, 11 milliseconds half-sine pulse —IEC 60068-2-27
    Nonoperating: 15.0 g peak, 11 milliseconds half-sine pulse; 1.0 inch roll-off front to back, 0.5 inch roll-off side to side —IEC 60068-2-27
    Handling Drops 60 mm, 1 drop per corner, 4 corners—IEC 60068-2-31
    Threshold Impact 0.85m/s, 3 impacts per caster, all 4 casters, 25 mm step-up—ETE
    1010-01
    Number of cords 2 (max)
    Regulations
    Meets or exceeds the following requirements:
    RoHS Compliance Level RoHS:YL
    Safety UL approval to UL 60950, EN60950, C22.2 No.60950, and CB Report for IEC 950; all including Amendments 1, 2, 3, 4 and 11 and full worldwide deviations. TUV approval to EN60950/IEC 950. GOST languages Certification for Eastern Block countries. Korean MIC Certification. China CCC mark using UL as agent. CE Declaration of Conformance (SMI self-declaration) to The Electromagnetic Compatibility Directive and Low Voltage Directive with accompanying "Technical Data File". Approval to Argentinian standards using UL as agent.
    RFI/EMI 47 CFR 15B (Code of Federal Regulations, Part 15, Subpart B) Class A; EN55022 Class A per EMC Directive 89/336/EEC (CE Mark); VCCI Class A; Industry Canada ICES-003; AS/NZ 3548 (Australia/New Zealand); CNS 13438 (Taiwan); KSC 5858 (MIC Mark/Korea)
    Immunity IEC 1000
    EN55024 per EMC Directive 89/336/EEC, including
    IEC 61000-4-2 Electrostatic discharge immunity test
    IEC 61000-4-3 Radiated, radio-frequency, electromagnetic field immunity test
    IEC 61000-4-4 Electrical fast transient/burst immunity test
    IEC 61000-4-5 Surge immunity test
    IEC 61000-4-6 Immunity to conducted disturbances, induced by radio frequency fields
    IEC 61000-4-8 Power frequency magnetic field immunity test
    IEC 61000-4-11 Voltage dips, short interruptions and voltage variations immunity tests

    Line Distortion EN 61000-3-2 per EMC Directive 89/336/EEC
    Voltage Fluctuations and Flicker EN 61000-3-3 per EMC Directive 89/336/EEC
    Clearance and Service Access
    Front 36 in.(91.4 cm)
    Rear 36 in.(91.4 cm)
    Dimensions and Weights
    Height 174 mm (6.85 in.)
    Width 440 mm (17.3 in.)
    Depth 635 mm (25 in.)
    Weight 37 kg (82 lb.) fully configured
    Rack Mounting
    Fits into a standard 19-inch-wide rack mount kit that complies with EIA-310-D-1992 standard

      Copyright � 2011 Sun Microsystems, Inc.  All rights reserved.
     Feedback