|
|
Library
| LTO-2 |
LTO2 SCSI Tape Drive, Half Height,
RoHS:Y |
| LTO-3 |
LTO3 SCSI Tape Drive, RoHS:Y |
| LTO-3 FC |
LTO3 FC Tape Drive, RoHS:Y |
| LTO4 |
LTO4 SAS Tape Drive, Half Height,
RoHS:Y |
| LTO4 |
LTO4 SCSI Tape Drive, RoHS:Y |
| LTO4 FC |
LTO4 FC Tape Drive, RoHS:Y |
The Sun StorageTek SL48 Tape Library,
RoHS:YL:
- Supports 2 LTO 3 or LTO4 Drives with SCSI or FC interfaces and up to 4 LTO 2 HH
Drives with SCSI interface or up to 4 LTO4 HH Drives with SAS interfaces
|
|
|
| AC Voltage Range |
88 to 264 VAC, single phase |
| Frequency |
47 to 63 Hz |
| Input Power, Maximum |
312 watts maximum (max drive load)
|
| Maximum AC Inrush (per psu) |
100 to 240 VAC, 50 to 60 Hz, 2.0
Amperes |
| Power Consumption |
Typical:
Maximum: |
| Temperature & Humidity |
Operating: 5° C to 35°
C (41° F to 95° F), 20% to 80% noncondensing
Nonoperating: -30° C to 60° C (-22° F to 140°
F), 10% to 90% noncondensing |
| Temperature Shock Immunity |
Maximum rate of change 10° C
per hour |
| Altitude |
Operating: 3048 m (10,000
ft.)
Nonoperating: 10,675 m (35,023 ft.) |
| Dust Concentration |
Less than 200 microgram/cubic meter |
| Shock |
Operating:4g 11ms pulse (+/-)
half sine
Nonoperating:152 cm/sec (60 inches/sec) |
| Vibration |
Operating:0.25 gRMS, 15 minutes
per axis (random)
0.25 gRMS, 1.0 octave per minute, 0-300-0Hz, 5 cycles, 3 axis (swept
sine)
Nonoperating:Ten sweeps, 5 to 300Hz, at 0.5G peak-to-peak. |
|
|
| Height |
174 mm (6.85 in.)
344 mm (13.54 in.) shipping |
| Width |
445 mm (17.5 in.)
596 mm (23.46 in.) shipping |
| Depth |
776 mm (30.55 in.)
994 mm (39.13 in.) shipping |
| Weight |
20.6 kg (45.32 lb.)
33.2 kg (73.04 lb.) shipping |
|
|
| Safety |
UL 60950-1; CAN/CSA 22.2 No. 60950-1;
EN60950-1 |
| RFI/EMI |
FCC (47 CFR 15, Subpart B) Class
A; CE (EN55022 Class A, EN 55024, EN61000-3-2, EN61000-3-3; VCCI (CISPR
22) Class A; Canada (ICES-003) Class A; Australia/New Zealand (AS/NZS
CISPR22); Taiwan BSMI (CNS13438 Class A and CNS14336) |
|
|
| Item |
LTO2 HH |
LTO3 FC / SCSI |
LTO4 FC / SCSI |
LTO4 HH |
| Number of Tape Drives |
1-4 |
1-2 |
1-2 |
1-4 |
| Number of Cartridges |
48 |
48 |
48 |
48 |
| Cartridge Capacity (native)1 |
200 GB |
400 GB |
800 GB |
800 GB |
| Cartridge Capacity (compressed)2 |
400 GB |
800 GB |
1.6 TB |
1.6 TB |
| Maximum Autoloader Capacity (native)1 |
9.68 TB |
19.2 TB |
38.4 TB |
38.4 TB |
| Maximum Library Capacity (compressed)2 |
19.2 TB |
38.4 TB |
76.8 TB |
76.8 TB |
| Maximum Transfer Rate (1 drive, native) |
24 MB/sec (86 GB/hour) |
80 MB/sec (288 GB/hour) |
120 MB/sec (432 GB/hour) |
80 MB/sec (288 GB/hour) |
| Maximum Transfer Rate (1 drive, compressed) |
48 MB/sec (172 GB/hour) |
160 MB/sec (576 GB/hour) |
240 MB/sec (864 GB/hour) |
160 MB/sec (576 GB/hour) |
1Native represents the capacity without
compression.
2Compressed identifies a capacity compression ratio of
2:1. |
|
|
Back: Minimum of 15.4 cm (6 in.)
Front: Minimum of 30.8 cm (12 in.)
Sides: Minimum of 5.08 cm (2 in.) |
The Sun StorageTek SL44 Tape Library
rack requirements:
- Racks with 10-32 threaded holes in the rack column (Sun Storage
Expansion Cabinet)
- Racks with M6 threaded holes in the rack column (Sun Rack 900
or 1000)
- Racks with 9.5 mm square holes in the rack column (Sun StorageTek
Rack)
|
