Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Sun[tm] LX50: Hardware Specifications

Racking
Fits most 19" industry standard racks. Package comes with a rack mounting kit, an optional rail based rack mounting kit (X5027A) is available. The Sun LX50 server does not currently fit into Sun's custom racks. Before the end of 2002, X-Option brackets will be available for Sun's racks.
Processor
Number 1 or 2
Architecture 1.4 GHz Pentium III
Cache memory 512KB cache
Main Memory
Capacities

Six DIMM sockets for up to 6GB of registered PC133 ECC SDRAM

Standard Interfaces
Ethernet 1 Two ethernet/fast ethernet (10BASE-T/100BASE-T) twisted-pair standard connector (RJ-45), self-sensing
Graphics One standard VGA port (HD15)
Keyboard and mouse 2 One standard PS/2 keyboard/mouse port. A PS/2 splitter (Y-cable) is included to support both keyboard and mouse connections to the single port.
PCI One full size 64-bit, 66-MHz, 3.3 V PCI 2.2 slot
One low profile 64-bit, 66/33-MHz PCI 2.2 slot
SCSI One 16-bit SE or LVD, VHDCI, SCSI port supporting 40-MB/sec (Ultra-wide SE), 80-MB/sec (Ultra 2), or 160-MB/sec
Serial 3 Two RS-232 (COM2) serial ports (RJ-45); one in the front, one in the rear
USB Four Universal Serial Bus (USB 1.1) ports; two in the front, two in the rear
1 - If 10/100 Ethernet cards are placed in the PCI slots, the full size slot becomes eth0 , the low profile slot becomes eth1 , the bottom rear is eth2 , and the top rear is eth3 . This is the case for all Intel 10/100 cards. When using other vendors, the ordering will remain eth0/eth1 on the rear ports.
2 - If a keyboard is required to select BIOS options, to run the diagnostics, or to select boot options in LILO, you must use a PS/2 keyboard.
3 - Only one port is enabled at a time. By default, the rear port is enabled until it is automatically disabled by plugging into the front port.
Internal Mass Storage
Disks Support for two (three without Floppy/CD-ROM Combo) 36GB or 72GB 10000 RPM SCSI Drives
Removable Media CD-ROM and Floppy Drive
Environment
AC input 100 - 240 VAC, 50 - 60 Hz, 3.6 A(max)
Input Power 250 W
Heat output 853 BTU/hr
Temperature Operating: 5° to 35° C (41° to 95° F)
Nonoperating: -40° to 65° C (-40° to 149° F)
Humidity Operating: 10% to 90% relative humidity at 27° C noncondensing
Nonoperating: 10% to 93% relative humidity at 38° C noncondensing
Acoustic noise

Idle: <45 dBA

Vibration Operating: 0.15 G z-axis; 0.10 G x- and y-axis, 5 to 500 Hz sine
Nonoperating: 0.50 G z-axis; 0.25 G x- and y-axis, 5 to 500 Hz sine
Shock Operating: 3 G, 11 ms, half-sine
Number of cords 1
Regulations
Meets or exceeds the following requirements:
FCC Class A, CISPR 22B, VCCI-A, UL, CE, Austel, BSMI, GOST R, MIC, Nemko GS, Canada ICES-003 Class A
Dimensions and Weights
Height 43mm (1.693 in)
Width - with mounting ears 430mm (16.93 in)
Depth - with front bezel 609mm (23.89 in)
Weight 11.2kg (26 lbs) appx.
Shipping Weight (product and packing) 17.2kg (40 lbs) appx.

  Copyright � 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback