Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Sun Fire V210 / V240 LEDs

Status LEDs

The front bezel of the Sun Fire V210 and V240 server contains three LED status indicators. They are located on the front bezel, and repeated on the rear panel.

Indicator Color
LED State
Meaning
Activity Green
On
The server is powered up and running the Solaris operating environment.
Off
Either power is not present, or Solaris is not running.
Service Required Yellow
On
The server has detected a problem and requires the attention of service personnel.
Off
The server has no detected faults.
Locator White
On
Identifies the server from others in a rack.

You can turn the Locator LED on and off either from the system console or the Sun Advanced Light-Out Manager (ALOM) command line interface (CLI).

Hard Disk Drives

The Sun Fire V210 server has slots for up to two hard disk drives. The Sun Fire V240 server has slots for up to four. The slots accept any Sun LVD SCSI hard disk drive conforming to the 1-inch SCA-2 form factor.

Each hard disk drive has two LED indicators associated with it.

Indicator Color
LED State
Component Status
Ready to remove Blue
On
Ready to remove
Off
Not ready to remove
Activity Green
Flashing
Active SCSI transactions
Off
No activity

Network Status Indicators

Each network connector has two status indicators.

The network status indicators convey:

  • Network link
  • Network speed (does not apply to the NET MGT port)
Indicator Color
LED State
Status
Network link Green
On
Link is established.
Blinking
Link is transferring data.
Off
Link is not established.
Network speed Green
On
The network link is established and running at its maximum supported speed.
Off
  • If the network activity indicator is on, the network link is established but not running at its maximum supported speed.
  • If the network activity indicator is off, network link is not established.

Power Supply Unit (PSU)

The Sun Fire V210 server has one PSU and two associated status indicators. The Sun Fire V240 server has dual redundant PSUs.

Color
LED State
Component Status
Green
On
Power is present and PSU is active.
Off
Either power is not present, or the PSU has shut down due to an internal protection event.
Amber
On
The PSU has shut down due to an internal protection event and requires service attention.
Off
The PSU is operating normally.

The Sun Fire V240 server has an additional LED indicator which tells you when a power supply unit is ready to be removed with the server running. (The Sun Fire V210 server has a single PSU and does not support this function.)

Color
LED State
Component Status
Blue
On
PSU is ready to be removed.
Off
The PSU is not ready for removal.

Caution: As long as an AC power cord remains connected to the server, potentially dangerous voltages could be present within the server.

 

  Copyright � 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback