Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback



Ultra AXmp

Codename: Crichton
501-4321 501-4322 501-4323 501-4324
System Control Complex A Complex B System I/O
501-5296 595-4943
AXmp Assembly
0MB FRU
w/o Module
AXmp Assembly
512MB
4× 300MHz
4× DC-DCl

Side View - Assembly w/o Sheetmetal

Notes

  1. The minimum operating system is Solaris 2.6 HW: 5/98.
  2. The minimum Ultra AXmp OBP is 3.10.7.
  3. OBP 3.10.53 supports MAC addresses 00:03:BA:xx:xx:xx.
  4. The Ultra AXmp does not have a system serial number.

Memory Notes

  1. The minimum memory size required is 64MB.
  2. The maximum memory size supported is 2GB.
  3. The minimum memory placement is eight DIMMs in Bank 0 or 1.

UltraSPARC Notes

  1. Remove the protective shroud from the CPU Module before installation.
  2. When one CPU Module is used, installed the CPU in any Complex A or Complex B slot.
  3. For improved performance when two CPU Modules are used, install one CPU in any Complex A slot and one CPU in any Complex B slot.

References

  1. AXmp OEM Technical Manual, 805-5865-03.
  2. AXmp and AXmp+ OEM Technical Manual, 806-5865-04.
  3. OEM Technical Manual Errata, 806-5180.



Ultra AXmp

501-4321
System Control

Jumper Settings
JUMPER PINS SETTING DESCRIPTION
J0101 2-3 In Factory Use
J0102 1-2 In Factory Use
J0201 2-3 In Factory Use
J0202 2-3 In Factory Use
J0205 1-6 Out Factory Use
J0206 1-2 Out Factory Use

UltraSPARC Speed Jumper Settings
CPU J2301
1-2
J2301
3-4
J2301
5-6
J2301
7-8
J2301
9-10
J2301
11-12
J2301
13-14
J2302
167MHz In Out In Out In Out In 2-3
200MHz In Out Out In In Out In 2-3
250MHz Out In Out Out Out Out Out 1-2
300MHz Out Out In In Out In Out 1-2
360MHz In Out In Out Out In Out 2-3
400MHz* In Out Out In In Out In 2-3
400MHz** Out In Out Out In In Out 2-3
* 805-5865-03
** 805-5865-03 Errata
** FIN I0504, June 1999



Ultra AXmp

501-4322 501-4323
Complex A Complex B

Complex A

Complex B

Complex A and B Jumper Settings
JUMPER PINS SETTING DESCRIPTION
J0102 2-3 In Factory Use
J0202 2-3 In Factory Use
J0302 1-2
1-2
In
Out
UltraSPARC I
UltraSPARC II



Ultra AXmp

501-4324
System I/O

Jumper Settings
JUMPER PINS SETTING DESCRIPTION
J0101 2-3 In JTAG Factory Use
J0201 2-3 In JTAG Factory Use
J0302 2-3 In JTAG Factory Use
J0401 1-2
1-2
In
Out
50ns DIMM
60ns DIMM
J0504 1-2
2-3
In
In
Select Flash PROM (default)
Select ROMBO
J0703 1-2
2-3
In
In
Serial A RS232 (default)
Serial A RS423
J0704 1-2
2-3
In
In
Serial B RS232 (default)
Serial B RS423
J0801 2-3 In JTAG Factory Use
J1002 1-2 In Rear panel switch is On: (default)
Front panel switch: push On/Off
Keyboard switch: push On
J1002 2-3 In Rear panel switch is toggled On/Off:
Front panel switch: not functional
Keyboard switch: not functional
J1804 2-3 In JTAG Factory Use
J3101 2-3 In JTAG Factory Use

  Copyright � 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback