---

Sun Blade X6250

375-3501	540-7254	A93-AA	594-4530	594-4531	594-4532
System Board	Assembly/FRU	X6250 Base 540-7254	X4361A 4GB 1.6GHz Xeon L5310	X4362A 8GB 1.86GHz Xeon E5320	X4363A 32GB 2.33GHz Xeon E5345

594-4533	594-4816	594-5282	594-5283	594-5284
X4364A 32GB 2.66GHz Xeon X5355	X4365A 32GB 3.0GHz Xeon 5160	X4367A 4GB 2.5GHz Xeon L5420	X4368A 4GB 2.33GHz Xeon E5410	X4369A 8GB 2.83GHz Xeon E5440

594-5672	594-5673
X6250-24L2660-22 4GB 2.66GHz Xeon L5430	X6250-24M2500-22 4GB 2.50GHz Xeon E5420

Headers, Jumpers, LEDs, and Switches

LOCATION	PINS	SETTING	DESCRIPTION
D12	n/a	n/a	PEM1 Power
D14	n/a	n/a	PEM1 Attention
D15	n/a	n/a	Ethernet Phy Activity
D17	n/a	n/a	Ethernet Phy Link
D18	n/a	n/a	PEM0 Power
D21	n/a	n/a	PEM0 Attention
D23	n/a	n/a	CPLD
D25	n/a	n/a	NEM0 Power
D27	n/a	n/a	NEM0 Attention
D30	n/a	n/a	NEM1 Power
D32	n/a	n/a	NEM1 Attention
D34	n/a	n/a	BMC Heartbeat
J19	1-2	Out	Unknown
J23	1-3 3-5 2-4 4-6	In In In In	Clear CMOS Normal CMOS Operation (default) Clear BIOS Password (BugID 6742739) Normal BIOS Operation (default)
JP9	14	n/a	Unused Connector
JP11	3	n/a	Unknown
S1	n/a	n/a	Unknown Button
S2	n/a	n/a	Unknown Button
S4	n/a	n/a	CPU and DIMM Fault Locate Button

Sun Blade X6250 Codename: Wolf

Notes

1. CPU 0 DIMM fault LEDs are located to the left and below each slot.
2. CPU 1 DIMM fault LEDs are located to the left and above each slot.
3. Press Fault Remind button S4 to illuminate the memory fault LEDs.
4. The FRU includes Disk Backplanes and Cables, System Board, Enclosure, and Cover.
5. The FRU does not include CPUs, Disks, Heatsinks, or Memory.
6. LEDs D12 through D34 are not visible when the blade is installed.
7. LEDs D12 through D34 are not activated by the Fault Remind button.

Disk Backplane Notes

1. The Disk Backplane, Data Cable, and Power Cable are not available as FRUs.
2. Disk Backplane Data Cables and Power Cables do not have Sun part numbers.
3. The Power Cable may be labeled 540-2479. This is a disk bracket released in 1993.
4. SAS configurations require RAID Expansion Module (REM) 371-2658.
5. The REM supports RAID 0/1/5/10 with SAS disk drives.
6. Use the system board SAS connectors for SAS/SATA/SSD drives connected to any REM.
7. Use the system board SATA connectors for SATA/SSD drives connected without a REM.

RoHS Notes

1. The Intel 6321ESB SL97P is a leaded component. The board is not .
2. The PMC-Sierra PM8380-NI is a leaded component. The board is not .

References

1. Sun Blade X6250 Server Module Installation Guide, 820-1182.
2. Sun Blade X6250 Server Module Service Manual, 820-1185.
3. Sun Blade X6250 Server Module Product Notes, 820-1186.