Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback


Netra 240

375-3178 375-3120
Assy 375-3148
Tomatillo 2.3
0MB USIIIi FRU
1× 1.280GHz
w Fan/Heatsink
Option 7427A
October 2003		 Assy 375-3148
Tomatillo 2.3
0MB USIIIi FRU
2× 1.280GHz
w Fan/Heatsink
Option 7428A
October 2003
375-3251 375-3247
Assy 375-3246
Tomatillo 2.3
0MB USIIIi FRU
1× 1.280GHz
w Fan/Heatsink
Option 7427A
March 2005		 Assy 375-3246
Tomatillo 2.3
0MB USIIIi FRU
2× 1.280GHz
w Fan/Heatsink
Option 7428A
March 2005

LOCATION PINS SETTING DESCRIPTION
JP1 1-2
3-4
9-10		 In
In
In		 1.4V Core VID[4:0] (00110)
1.4V Core VID[4:0] (00110)
1.4V Core VID[4:0] (00110)
JP2 1-2
1-2		 Out
In		 ALOM Flash Normal (default)
ALOM Flash Recovery
JP3 1-2
1-2		 Out
In		 ALOM Normal (default)
ALOM Reset
JP4 1-2
3-4		 In
In		 1.280GHz CONFIG[2:0] (100)
1.280GHz CONFIG[2:0] (100)
JP5 1-2
1-2		 Out
In		 ATAPI Master - CSEL Open (default)
ATAPI Slave - CSEL Grounded
JP6 1-2
2-3		 In/Out
In		 OBP Flash Select (default)
ROMBO Select
JP8 1-2
2-3		 In
In		 Normal CMOS (default)
Clear CMOS
JP10 1-2
1-2		 Out
In		 PS_ON# (default)
PS_ON# Override
JP11 1-2
1-2		 Out
In		 OBP Flash Write Enabled (default)
OBP Flash Write Protected
JP12 1-2
1-2		 Out
In		 ALOM Console Normal (default)
ALOM Console Bypass
JP13 1-2
2-3		 In/Out
In		 OBP Flash Normal (default)
OBP Flash Recovery

Netra 240 Codename: Enchilada 19

Notes

  1. The minimum operating system is Solaris 8 7/03.
  2. ALOM update is available at Firmware Downloads.
  3. The JBUS clock is 160MHz and the Memory clock is 128MHz with 1.280GHz CPUs.

Memory Notes

  1. Bank, Rank, DIMM, and XOR Interleaving is supported.
  2. UltraSPARC IIIi supports single bank and dual bank DDR DIMMs.
  3. Two DIMMs of the same bank size (single or dual) and memory size form a bank.
  4. The minimum requirement is two DIMMs in any Bank (B0/D0/D1 or B1/D0/D1).
  5. Only CPU 0 DIMMs are access1ble in a single CPU system (CPU 0).
  6. Memory is mapped globally and is access1ble by either CPU in a dual-CPU system.
  7. Each processor interfaces with its own dedicated block of DDR-1 SDRAM DIMMs.
  8. Memory error reporting identifies a failing Bank, not a single failing DIMM.

Motherboard Notes

  1. Motherboard 375-3148 is without Memory or UltraSPARC IIIi.
  2. Motherboard 375-3246 is without Memory or UltraSPARC IIIi.
  3. The FRUs include Motherboard (375-3148 or 375-3246), US IIIi, and Fan/Heatsink 370-5126 or 370-7786.
  4. Remove the Fan from the Heatsink prior to System Board installation.
    See 817-4048 below.
  5. Motherboard replacement requires a 3/16 Hex driver, #2 Phillips driver, and a Minus driver with a maximum thickness of 0.660 mm (0.026").

References

  1. Netra 240 Server Installation Guide, 817-2698.
  2. Netra 240 Server Service Manual, 817-2699.
  3. Netra 240 Server System Administration Guide, 817-2700.
  4. Netra 240 Server Release Notes, 817-3142.
  5. Sun Advanced Lights Out Manager Software User's Guide for the Netra 240 Server, 817-3174.
  6. Heatsink Field Replaceable Unit Installation Guide, 817-4048.


Netra 240

375-3261 375-3227
Assy 375-3228
Tomatillo 2.3
0MB USIIIi FRU
1× 1.503GHz
w Heatsinks
Option 7437A
February 2005		 Assy 375-3228
Tomatillo 2.3
0MB USIIIi FRU
2× 1.503GHz
w Fans/Heatsinks
Option 7438A
February 2005

Netra 210 / Netra 240

375-3359 375-3360 375-3471 375-3472
Assy 375-3325
Tomatillo 2.3
0MB USIIIi FRU
1× 1.503GHz
w Fanless Heatsink
Option 7437A-4
N210/N240
December 2005
L
1× 1.336GHz on N210
see Jumper JP4 below		 Assy 375-3325
Tomatillo 2.3
0MB USIIIi FRU
2× 1.503GHz
w Fanless Heatsink
Option 7438A-4
N210/N240
December 2005
L
2× 1.336GHz on N210
see Jumper JP4 below		 Assy 375-3325
Tomatillo 2.3
0MB USIIIi FRU
1× 1.336GHz
w Fanless Heatsink
Option 8218A-Z
N210
June 2006
L		 Assy 375-3325
Tomatillo 2.3
0MB USIIIi FRU
2× 1.336GHz
w Fanless Heatsink
Option 8219A-Z
N210
June 2006
L
375-3473 375-3474 375-3483 375-3484
R06 Assy 375-3459
Tomatillo 2.3
0MB USIIIi FRU
1× 1.336GHz
w Fanless Heatsink
N210
October 2006
L		 R06 Assy 375-3459
Tomatillo 2.3
0MB USIIIi FRU
2× 1.336GHz
w Fanless Heatsink
N210
October 2006
L		 R06 Assy 375-3459
Tomatillo 2.3
0MB USIIIi FRU
1× 1.503GHz
w Fanless Heatsink
N240
October 2006
L		 R06 Assy 375-3459
Tomatillo 2.3
0MB USIIIi FRU
2× 1.503GHz
w Fanless Heatsink
N240
October 2006
L

LOCATION PINS SETTING DESCRIPTION
JP1 1-2
3-4
9-10		 In
In
In		 1.4V Core VID[4:0] (00110)
1.4V Core VID[4:0] (00110)
1.4V Core VID[4:0] (00110)
JP2 1-2
1-2		 Out
In		 ALOM Flash Normal (default)
ALOM Flash Recovery
JP3 1-2
1-2		 Out
In		 ALOM Normal (default)
ALOM Reset
JP4 (N210) 5-6 In 1.336GHz CONFIG[2:0] (011) *
JP4 (N240) 1-2
5-6		 In
In		 1.503GHz CONFIG[2:0] (010)
1.503GHz CONFIG[2:0] (010)
JP5 1-2
1-2		 Out
In		 ATAPI Master - CSEL Open (default)
ATAPI Slave - CSEL Grounded
JP6 1-2
2-3		 In/Out
In		 OBP Flash Select (default)
ROMBO Select
JP8 1-2
2-3		 In
In		 Normal CMOS (default)
Clear CMOS
JP10 1-2
1-2		 Out
In		 PS_ON# (default)
PS_ON# Override
JP11 1-2
1-2		 Out
In		 OBP Flash Write Enabled (default)
OBP Flash Write Protected
JP12 1-2
1-2		 Out
In		 ALOM Console Normal (default)
ALOM Console Bypass
JP13 1-2
2-3		 In/Out
In		 OBP Flash Normal (default)
OBP Flash Recovery
* Maximum speed for the Netra 210 is 1.336GHz.

Netra 240 Codename: Enchilada 19

Notes

  1. The minimum operating system is Solaris 8 2/04, Solaris 9 9/04, or Solaris 10.
  2. ALOM update is available at Firmware Downloads.
  3. The JBUS clock is 167MHz and the Memory clock is 111MHz with 1.336GHz CPUs.
  4. The JBUS clock is 167MHz and the Memory clock is 125MHz with 1.503GHz CPUs.

Memory Notes

  1. Bank, Rank, DIMM, and XOR Interleaving is supported.
  2. UltraSPARC IIIi supports single bank and dual bank DDR DIMMs.
  3. Two DIMMs of the same bank size (single or dual) and memory size form a bank.
  4. The minimum requirement is two DIMMs in any Bank (B0/D0/D1 or B1/D0/D1).
  5. Only CPU 0 DIMMs are access1ble in a single CPU system (CPU 0).
  6. Memory is mapped globally and is access1ble by either CPU in a dual-CPU system.
  7. Each processor interfaces with its own dedicated block of DDR-1 SDRAM DIMMs.
  8. Memory error reporting identifies a failing Bank, not a single failing DIMM.

375-3261 / 375-3227 Motherboard Notes

  1. Motherboard 375-3228 is without Memory or UltraSPARC IIIi.
  2. F375-3261 includes Assembly 375-3228, US IIIi, and Heatsink w/o Fan 370-7784.
  3. F375-3227 includes Assembly 375-3228, US IIIi, and Fan/Heatsink 370-7016 or 370-7786.
  4. FRUs F375-3261 and F375-3227 include Fan/Heatsink removal tool 345-1439.
  5. Remove the Fan from the Heatsink prior to System Board installation.
    See 817-4048 below.
  6. Motherboard replacement requires a 3/16 Hex driver, #2 Phillips driver, and a Minus driver with a maximum thickness of 0.660 mm (0.026").

375-3359 / 375-3360 / 375-3471 / 375-3472 Motherboard Notes

  1. Motherboard 375-3325 is without Memory or UltraSPARC IIIi.
  2. FRUs include Assembly 375-3325, US IIIi, and Fanless Heatsink 371-0984.
  3. Motherboard replacement requires a 3/16 Hex driver, #2 Phillips driver, and a Minus driver with a maximum thickness of 0.660 mm (0.026").

375-3473 / 375-3747 / 375-3483 / 375-3484 Motherboard Notes

  1. Motherboard 375-3459 is without Memory or UltraSPARC IIIi.
  2. FRUs include Assembly 375-3459, US IIIi, and Fanless Heatsink 371-0984.
  3. Motherboard replacement requires a 3/16 Hex driver, #2 Phillips driver, and a Minus driver with a maximum thickness of 0.660 mm (0.026").

References

  1. Netra 210 Server System Administration Guide, 819-2749.
  2. Netra 210 Server Service Manual, 819-2750.
  3. Netra 210 Server Product Notes, 819-2751.
  4. Netra 240 Server Installation Guide, 817-2698.
  5. Netra 240 Server Service Manual, 817-2699.
  6. Netra 240 Server System Administration Guide, 817-2700.
  7. Netra 240 Server Release Notes, 817-3142.
  8. Sun Advanced Lights Out Manager Software User's Guide for the Netra 240 Server, 817-3174.
  9. Heatsink Field Replaceable Unit Installation Guide, 817-4048.

  Copyright � 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback