Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback



20GB 4 mm DDS-1 Autoloader

Servers: SPARCcenter 2000

Options 825 / 826 / 827

370-1616 370-1617
Archive 4584NP
Light Grey Bezel
Archive 4584NP
Black Bezel

Operator Panel

LMJB0153 PCB

Address Select Switch Cable

In the Multi-Tape Backup Tray and SC2000, orient the Address Select Switch Cable as shown, and plug it into JP6.

Note

Remove the mylar sheet from the bottom of the drive before installation.

References

  1. 20GB 4mm Autoloader Destop Storage Module Installation and User's Guide, 801-5401.
  2. Product Note, 801-6234.

Jumper and Switch Settings

JP4
PINS SETTING DESCRIPTION
1-2 Out Disable TERMPWR to bus
1-2 In Enable TERMPWR to bus

JP6
SCSI ID 3 2 1
0 Out Out Out
1 Out Out In
2 Out In Out
3 Out In In
4 In Out Out
5 In Out In
6 In In Out

SW1
SWITCH SETTING DESCRIPTION
1 Off Enable SCSI ID 0 = 20
2 Off Enable SCSI ID 1 = 21
3 Off Enable SCSI ID 2 = 22
4 On Enable SCSI-2 mode
5 On Enable parity
6 Off Enable data compression
7 Off Reserved for factory use
8 On Enable power-on self test

Switch Settings

LMJB0178 PCB
S1
SWITCH SETTING DESCRIPTION
1
2
Off*
Off*
English language display
1
2
Off
On
French language display
1
2
On
On
Spanish language display
1
2
On
Off
German language display
3
3
Off
On*
Stop after last tape
Restart at Tape 1 after last tape
4
4
On*
Off
High intensity display
Low intensity display
5 On* Enable power-on self test
6 Off Not used
7 Off Not used
* Default settings
Auto-Loader
S5
SWITCH SETTING DESCRIPTION
1 Off*
On
Horizontal character display
Vertical character display
2 Off
On*
Do NOT load tape on power-up
Load tape on power-up
3 Off
On*
Stop after last tape
Restart at first tape after last tape
4 Off Not used
* Default settings

Notes

  1. The minimum operating system is Solaris 2.2.
  2. Solaris 2.2 reads and writes in low-density or high-density mode.
  3. The 4-Tape Magazine part number is 370-1683-01.
  4. The Blank 90 Meter Tape part number is 370-1612-01
  5. The Cleaning Kit part number is 370-1613-01.
  6. Firmware update tape 4.CDA-424 is part number 370-2867-01.
  7. Firmware update tape 4.CDB-424 is part number 370-3270-01.

References

  1. 20 Gbyte 4mm Tape Auto-Loader Installation Manual, 801-4976.
  2. 20 Gbyte 4mm Tape Auto-Loader User's Guide, 801-4977.

  Copyright � 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback