150MB 1/4" Tape Drive
| Servers: |
SPARCserver 6x0MP, SPARCcenter 2000 |
Options 539 / 565 / 660
| 370-1205 |
370-1206 |
370-1218 |
370-1246 |
Archive 2150S
Half-Height
Black Bezel |
Archive 2150S
Full-Height
Black Bezel |
Archive 2150S
Half-Height
Custom Bezel |
Archive 2150S
Full-Height
Light Grey Bezel |
| Rear View |
 |
|
| JUMPER |
SETTING |
DESCRIPTION |
| RXD/TXD |
Out |
Serial Port |
| DIAG |
Out |
Normal/Diag |
| Parity |
Out |
Parity (in for 370-1246) |
| CF2,CF1,CF 0 |
In |
Disconnect Transfer Size = 32K |
| ID2,ID1,ID0 |
As required |
SCSI ID |
|
|
| Flex Cable |
 |
In the Desktop Tape Pack, remove the SCSI ID jumpers,
orient the Flex Cable as shown, and plug it into the
SCSI ID jumper block. |
|
|
| Address Select Switch Cable |
 |
In the External Storage Module, orient the Address Select
Switch Cable as shown, and plug it into the SCSI ID
jumper block. |
|
Note
- The Cartridge Tape part number is 370-1203-01.
Reference
- 150MB 1/4-Inch Tape Drive Configuration Manual, 813-2076.
|
