Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

56-inch Expansion Cabinet

RETMA Rail Mounting Screw Size #10-32

955



Table Legend
[F] = Field Replaceable Unit (FRU)
NS = Not Shown

CODE PART # DESCRIPTION
1 340-1884 Anti-Tilt Panel
2 540-1857 [F] Vented Panel Assembly
3 540-1947 [F] 1/2" Tape Panel Assembly with Cutout
4 540-2252 Front Panel with 4 Tape Drive Cutouts
5 540-1859 Cap Panel Assembly
6 240-1630 #6-32 Ballstud
7 340-1840 [F] Top Panel
8 540-2393 [F] Keyswitch Assembly (replaced 540-1285)
9 340-1913 Filler Panel, 5.2" × 19"
10 340-1885 Side Restraint Bracket, Upper
11 240-1372 [F] M4 0.7 × 10 mm Screw
12 540-1718 Frame Assembly
13 340-1848 Side Panel
14 370-1983 [F] 230/240V Blower
15 240-1953 #10-32 × 1/2" Screw (replaced 240-1207)
16 340-1886 Side Restraint Bracket, Lower
17 240-1717 Caster (replaced 370-1210)
18 240-1373 M4 0.7 Kepnut
19 230-1418 Leveler Foot (replaced 230-1181)
20 300-1263 [F] 230V Power Sequencer (replaced 370-1155)
20 300-1264 [F] 240V Power Sequencer (replaced 370-1156)
21 540-1929 [F] 230V Fan Assembly 1
21 540-1930 [F] 240V Fan Assembly 1
22 240-1655 [F] #10-32 × 3/4" Screw
23 340-1845 [F] Rear Panel
24 340-2047 Kick Panel
NS 230-1166 Cable Tie 5.5", Reusable
NS 230-1170 Cable Tie 10", Reusable
NS 340-2138 Ballast, 30 lbs
NS 530-1303 [F] Remote Keyswitch Cable

800-6371 56-inch Data Center Exp Cabinet Service Manual

  1. The Fans are not installed in Expansion Cabinets built after June 1993, unless a Front Load Tape Drive is ordered as a factory installed option. The Fans were replaced by Blower 370-1983 in July 1995.

  Copyright � 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback