Maxtor LXT-213SY (207MB)
3 1/2" 3600 RPM Single Ended SCSI
| Workstations: |
Sun 4/40, 4/50, 4/75
SPARCstation 10 |
Option 553
| JUMPER |
SETTING |
DESCRIPTION |
USAGE |
| A0,A1,A2 |
Out |
Drive ID |
Target 0 |
| A0 |
In |
Drive ID |
Target 1 |
| A1 |
In |
Drive ID |
Target 2 |
| A0,A1 |
In |
Drive ID |
Target 3 |
| WS |
In |
Wait spin |
Spin with power |
| EP |
In |
Parity |
Enable parity |
| TP |
Out |
TERMPWR |
Disable TP |
Power
- 0.6 Amps @ +5Vdc
- 0.6 Amps @ +12Vdc
- 10.2 Watts
Notes
- The Sun-4/60/65 chassis does not provide adequate cooling for the 207MB
Disk Drive.
- This drive is not supported inside the Desktop Storage Pack due to the
orientation of the address jumpers.
- The SS10 requires minimum Firmware 4.22 (370-1327-04 Rev 52).
References
- SPARCstation IPC Installation Guide, 800-5037.
- SPARCstation IPC Installation Guide, 800-5565.
Installing SPARCstation 2 Internal Disk Drives, 800-5661.
|
